Besides kinds of CBD Vape Carts,There are still 7 common ways of CBD atomization?

1. Compression atomization

Compression atomization is also called jet atomization. According to the venturi injection principle, compressed air is used to form a high-speed air flow through the small pipe orifice. The generated negative pressure drives the liquid or other fluids to spray onto the barrier together, splashes around under the high-speed impact, and makes the droplets turn into mist particles and eject from the air outlet pipe.

Medical compression atomizer shall meet the following requirements:

• 1) Drugs are either aqueous or oil solutions, but most of them are aqueous solutions. If they are insoluble in water, they can         be made into oil solutions, but oil solutions as excipients have a great impact on the lungs;
• 2) The particle size after atomization should also be less than 5um;
• 3) The liquid medicine needs aseptic treatment.

CBD is soluble in MCT and other oil solutions. CBD oil is dispersed into fine particles below 10um by high-pressure air flow, which is inhaled by human body after deceleration. However, the experience of oil solution inhalation into the lungs is very poor, very choking, and may damage the lungs.

2、Ultrasonic atomization
Ultrasonic nebulization is the use of ultrasonic directional pressure, so that the surface of the liquid bulge, cavitation occurs around the bulging surface of the liquid, so that the liquid atomized into small molecules of aerosol. Ultrasonic nebulizer oscillation frequency of 1.7MHz or 2.4MHz, more than the range of human hearing, the electronic oscillation of human and animal harmless, the device through the ceramic atomization piece of high-frequency resonance, the liquid water molecular structure to break up and produce a natural floating water mist. In addition, the atomization process will release a large number of negative ions, which will produce electrostatic reaction with the smoke and dust floating in the air and make it precipitate.

If the drug to achieve ultrasonic nebulization need to have the following prerequisites.

• 1) must be water soluble, if not water soluble need to add surfactant or emulsifier, so that the drug dissolved in aqueous solution before ultrasound.
• 2) the aerosolized fluid inhaled via the lungs needs to be sterile and technically difficult.
• 3) The particle size of the aerosolized water mist needs to be less than 5um, which needs to be studied in combination with the drug.

CBD ultrasonic nebulization products are mostly conceptual hydration cosmetics, 1mg CBD can be solubilized into 1-3ml water solution, the nebulization time is 30min, and because of the solubilization to join a large number of excipients, the inhalation experience is extremely poor.

Most commercially available products are cosmetic hydration products, which do not play a therapeutic role.

3、Heating nebulization

Heating nebulization, the principle is to heat the drug directly, so that it sublimates into a gas for inhalation. The most used in medicine for anesthetics, enflurane, isoflurane, sevoflurane, etc., by direct heating to produce aerosols, inhaled to achieve the effect of general anesthesia or local anesthesia.

In recent years, there are also cases of products like CCELL, KRT,TKO,Such as the products in store of ecigcarts.com, etc., where the slightly higher boiling point of loxapine and other substances are formed into drugs.

CBD atomization products on the market are mostly e-cigarettes, whose boiling point is between 410-500 ℃, loxapine boiling point of 458 ℃. CBD heating atomization into drugs is possible, but need to work on the design and precise coordination of the heating system and atomization system.